Cubicle Rail System

Whole-system topology proof with four printed parts. Slicing and plate layout were deferred.

Experimental freeform-gimbal topology predecessor.

Density-topology revision; documented support-free X1C fabrication proof.

Fabrication-aware topology revision with retained fit coupons.

Internal fillets in the retained four-part arrangement.

Close-mount retrofit with a different interface.

Top-loading carriage with a permanent lower catch.

Upper carriage bracing and a removable cap.

Gravity-bearing yaw post and cradle with a dual-index VESA mount.

Four-piece layout with an integrated wall hook and rail.

Revised yaw and pitch joints with a double-shear cap and indexed rosette.

Topology-guided hook pockets, branched gimbal and lighter VESA web.

Simplified five-piece mount with a captured carriage and two-axis gimbal.

PLA-only proof revision with rigid contact shims and fit wedges.

Material-separated plate layout for structural, wear and contact components.

Refined joints, keyed rail splice and split top-yoke assembly.

Complete modular prototype with separate rail, hanger, carriage and VESA pieces.

Wall-hook opening gauges and a 75/100 mm VESA hole-location template.

Rail coupon, sliding clearance gauges, carriage, wear shoe and cam-lever samples.